ASTM D2103-2015 聚乙烯膜和板的規格

tag：發布日期： 2024-06-21

　　ASTM D2103-2015

　　中文名稱：聚乙烯膜和板的規格

　　英文名稱：Standard Specification for Polyethylene Film and Sheeting

　　原文名稱：Standard Specification for Polyethylene Film and Sheeting

　　范圍：This specification covers the classification of polyethylene film and sheeting. Recycled polyethylene film or resin may be used as feedstock, and the film or sheeting may contain additives for surface property improvement, pigments, or stabilizers, or a combination of these, but they must conform to the requirements specified. Material covered in this specification shall be designated by a five-digit type number, with each numeral (from 0 to 5) indicating the cell limit within which the values of the density, impact strength, kinetic coefficient of friction, haze, and nominal thickness of the material falls under. The sheet or film shall be manufactured free, as commercially possible, of gels, streaks, pinholes, particles of foreign matter, and undispersed raw material, and without any other visible defects such as holes, tears, or blisters. The edges of the sheet or film shall be free of nicks and cuts. The surface of the sheet or film may also be treated by flame, corona discharge, or other means to improve the surface properties. Tests to determine the density, impact strength, kinetic coefficient of friction, haze, and nominal thickness of the material shall be performed and shall conform to the requirements specified.

　　發布日期：2015-04-01

　　實施日期：2015-04-01

　　標準組織：美國試驗與材料協會標準(ASTM)

　　ICS分類號：(83.140.10)薄膜和薄板

　　中國標準分類號：(G33)塑料型材

　　同一中標分類下的其他標準

　　• ASTM C578-2014a硬質泡沫聚苯乙烯隔熱材料規格

　　• ASTM C582-2009耐蝕設備用接觸模塑增強熱固塑料層壓材料的規格

　　• ASTM C1409-2008測量和評定絕緣管及部件數量的指南

　　• ASTM D706-2009醋酸纖維素模塑與擠壓料規格

　　• ASTM D707-2009醋酸丁酸纖維素模制與擠壓料規格

　　• ASTM C1349-2010建筑用平板玻璃包層聚碳酸酯規格