ASTM A31-2014 壓力容器鋼鉚釘和鉚釘用棒材規格

　　ASTM A31-2014

　　中文名稱：壓力容器鋼鉚釘和鉚釘用棒材規格

　　英文名稱：Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

　　原文名稱：Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

　　范 圍：This specification covers the chemical, mechanical, and dimensional requirements, and associated test methods for steel rivets for use in boilers and pressure vessels, and steel bars for use in the manufacture of such rivets. Two grades of steel are covered here, as follows: Grade A and Grade B. The steel used to make the rivets shall be manufactured by open-hearth, electric-furnace, or basic-oxygen process, and the corresponding rivets shall be manufactured from steel bars conforming to the applicable bar grade ordered. The steel shall undergo heat and product analysis for measurements of chemical contents for carbon, manganese, phosphorus, and sulfur. Finished bars and rivets shall go through rivet bend, rivet flattening, bar tensile, and bar bend tests for measurements of mechanical properties such as ratio of bend diameter to diameter of the shank for rivets, and tensile strength, yield point, elongation, and ratio of bend diameter to diameter of specimen for bars.

　　發布日期：2014-04-01

　　實施日期：2014-04-01

　　標準組織：美國試驗與材料協會標準(ASTM)

　　ICS分類號：(21.060.40)鉚釘

　　同一標準分類下的其他標準

　　• ASME B18.1.2-1972(2011)大鉚釘(公稱直徑1/2英寸及以上)

　　• ASME B18.30.1M-2000(R2005)開口型抽芯盲鉚釘

　　• ASTM A31-2014壓力容器鋼鉚釘和鉚釘用棒材規格

　　• ASTM A502-2003(R2015)