地理標志產品國窖1573檢測

地理標志產品國窖1573檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 1573-2018煤的熱穩定性測定方法

本標準規定了測定煤的熱穩定性的方法提要、儀器設備、樣品、測定步驟、結果表述、方法精密度和試驗報告。本標準適用于褐煤、無煙煤以及不粘結性煙煤。

GB/T 15730-2008電訊夾扭鉗和剪切鉗通用技術條件

本標準規定了電訊夾扭鉗和電訊剪切鉗的的技術要求、試驗方法、檢驗規則和包裝、標志、運輸與貯存。本標準適用于電訊夾扭鉗和電訊剪切鉗（以下簡稱電訊鉗）。本標準不適用于帶電作業用的電訊鉗。

GB/T 15731-2015內河旅游船星級的劃分與評定

本標準規定了中華人民共和國境內內河旅游船(以下簡稱旅游船)星級的劃分條件、服務質量和運營規范要求。本標準適用于中華人民共和國境內內河水域,具有24 h(含24 h)以上營運能力的各類旅游船。

GB/T 15732-1995漢字鍵盤輸入用通用詞語集

本標準規定了漢字鍵盤輸入用通用詞語。 本標準適用于漢字鍵盤輸入、方案優化和評測。中文信息處理的其他領域也可參照執行。

GB 15735-2012金屬熱處理生產過程安全、衛生要求

本標準規定了熱處理生產過程中安全、衛生的通用技術要求。本標準適用于熱處理生產和為熱處理生產提供生產裝置以及與熱處理生產有關的安全、衛生。

GB/T 15736-2016燃氣輪機輔助設備通用技術要求

本標準規定了燃氣輪機輔助設備的通用技術要求。本標準適用于發電用燃氣輪機輔助設備的設計、制造、采購和使用。其他類型的燃氣輪機可參考使用。

GB/T 15737-2014縮微攝影技術 銀-明膠型縮微品的沖洗與保存

本標準規定了中期和超長期存儲的縮微品制作過程中有關定影、水洗和干燥的要求以及縮微品的保存條件。本標準適用于符合GB/T 7430-1996規定的以醋酸纖維素酯、聚酯(聚乙烯對苯二甲酸酯)等為片基的常規沖洗的銀-明膠型黑白膠片縮微品。本標準不適用于微泡膠片縮微品、重氮膠片縮微品、干銀膠片縮微品和彩色膠片縮微品。

GB/T 15738-2008導電和抗靜電纖維增強塑料電阻率試驗方法

本標準規定了內部加入導電微粒或抗靜電劑等而具有導電和抗靜電性能的纖維增強塑料電阻率試驗方法的原理、儀器和測量裝置、試樣、試驗環境條件、試驗步驟、試驗結果計算及試驗報告等。本標準適用于測量電阻率小于10<上標 6>Ω?m的材料，不適用于因改變表面電阻而具有導電和抗靜電的材料。

JJF 1573-2016旋光儀及旋光糖量計型式評價大綱

本規范適用于分類編碼為46180500的旋光儀和分類編碼為46181000的旋光糖量計的型式評價。

CNS 15732-2014工業用機器人－握持式夾爪之物件處理－詞匯及特性描述

本標準規定4.1.2.1所定義握持式夾爪之端效器的功能性。本標準提供物件處理及握持式夾爪之功能、結構及元件的用語。參考性質之附錄A，提供握持式夾爪特性之格式。該部分可以下列方式使用。(a) 端效器制造商提供其產品特性給機器人使用者。 (b) 機器人使用者可規范其所需端效器之要求。(c) 機器人使用者可描述所欲處理之物件及其特定機器人應用上物件處理的特性。本標準亦適用于非工業用機器人定義之簡易處理系統，例：取放或主從單元等。

AS_NZS 1573-1995銅和銅合金用于工程目的的電線

This Standard specifies requirements for copper and copper alloy wire for general engineering purposes supplied in forms other than straight lengths.NOTE: Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.

ISO 1573-1980茶葉 103℃時質量損耗的測定

The method consists in heating a test portion in an oven at 103 +/-2 degrees centigrade, to constant mass.

ISO 15730-2023

This document specifies the information to be supplied by the purchaser to the finisher, requirements and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX, S3XXXX and S4XXXX series, and the precipitation hardened alloys (see ISO 15510 for information on composition).

ISO 15732-2003精細陶瓷(高級陶瓷、高級工業陶瓷).室溫下用單邊預裂束法(SEPB)測定塊體陶瓷破裂韌性的試驗方法

This International Standard describes a test method for the determination of fracture toughness of monolithic ceramic materials at room temperature by the Single Edge Precracked Beam (SEPB) method.nThis International Standard is intended for use with monolithic ceramics and whisker- or particulate-reinforced ceramics which are regarded as macroscopically homogeneous. It does not include continuous-fiber-reinforced ceramic composites.nThis International Standard is for material development, material comparison, quality assurance, characterization, reliability and design data generation.nFracture toughness values determined with other test methods cannot be interchanged with KIpb as defined in this International Standard, and may not be interchangeable with each other.nValues expressed in this International Standard are in accordance with the International System of Units (SI).

ISO 15733-2015精細陶瓷 (高級陶瓷, 高級工業陶瓷). 在大氣壓力和室溫下陶瓷復合材料的機械性能. 拉伸性能的測定

This International Standard specifies the conditions forndetermination of tensile properties of ceramic matrix compositenmaterials with continuous fibre reinforcement at room temperatures.nThis International Standard applies to all ceramic matrixncomposites with a continuous fibre reinforcement, unidirectionaln(1D), bi-directional (2D), and tri-directional (xD, with 2n< x ≤ 3), loaded along one principal axis ofnreinforcement.nNOTE In most cases, ceramic matrix composites to be used at highntemperature in air are coated with an antioxidation coating.

ISO 15734-2001小艇 液壓靜力釋放裝置

This International Standard specifies performance and testing requirements for hydrostatic release units used in conjunction with float-free lifesaving appliances including inflatable liferafts and Emergency Position Indicating Radio Beacons (EPIRB 's). Hydrostatic release units which comply with this International Standard and which have been formally approved by the cognizant Maritime Safety Administration may be considered to comply with the 1974 Safety Of Life At Sea Convention (SOLAS 74) and the IMO Life-Saving Appliances Code, as amended.

ISO 15736-2006船舶和海上技術.信號救生設備.發生設備的試驗、檢查和標記

This International Standard specifies production tests, inspections, conformity assessment procedures andmarking requirements for life-saving appliances that utilize pyrotechnic devices in functioning. Specifically, itapplies to products which have been evaluated and tested in accordance with the International MaritimeOrganization (IMO) Recommendation on testing of life-saving appliances, and type approved by maritimeadministrations to the requirements of the IMO Life-Saving Appliance (LSA) Code for use on ships subject tothe requirements of the 1974 Safety of Life at Sea Convention (as amended). The basic principles may beconsidered suitable for pyrotechnic life-saving appliances manufactured to other than the IMO requirements,however this International Standard applies directly only to products for which it contains specific requirements.This International Standard does not affect the requirement in part 2, section 4 of the IMO Recommendationon testing of life-saving appliances to periodically repeat full prototype testing of pyrotechnic life-savingappliances. However, compliance with this International Standard may be taken into account byadministrations in prescribing the frequency of such tests.