油田地面注水系統檢測

油田地面注水系統檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 8423.1-2018石油天然氣工業術語 第1部分:勘探開發

GB/T 8423的本部分界定了石油天然氣地質、油氣田開發、采油采氣工程和采油用油田化學劑等領域的術語及定義。本部分適用于石油天然氣地質與勘探、油氣藏工程、采油工程、采氣工程和油田化學劑等領域，石油天然氣工業其他領域可參照使用。

GB/T 21412.1-2010石油天然氣工業 水下生產系統的設計與操作 第1部分：一般要求和推薦做法

本部分制定了整套水下生產系統從設計到廢棄各個階段的一般要求和推薦做法，作為一個綱領性文件用于指導和制定涉及到水下生產系統各個組成部分更為詳細要求的子系統標準。同時，對于子系統標準內未包括的某些部分，如系統設計、結構、管匯、吊裝設備、顏色和標記等，也給出了較為詳細的要求。對那些應用范圍有限的特種設備，如密閉在干式艙中的組合式采油樹、采油樹和管匯等，這里未做專門討論，但本部分中的相關條款同樣適用于這類設備。

GB/T 31453-2015油田生產系統節能監測規范

本標準規定了油田機械采油系統、原油集輸系統、注水系統、注聚系統、供配電系統、鍋爐等油田生產系統及主要耗能設備的節能監測項目與指標要求、節能監測檢查及測試方法和結果評價。本標準適用于油田機械采油系統、原油集輸系統、注水系統、注聚系統、供配電系統、鍋爐等油田生產系統及主要耗能設備的節能監測。

GB/T 33653-2017油田生產系統能耗測試和計算方法

本標準規定了油田生產系統中的機械采油系統、原油集輸系統、注水系統、注聚合物系統、注汽系統的主要耗能設備、耗能單元以及系統的能耗測試和計算的要求及方法。本標準適用于油田生產系統中的機械采油系統、原油集輸系統、注水系統、注聚合物系統、注汽系統的主要耗能設備、耗能單元以及系統的能耗測試和計算。

GB/T 36714-2018用能單位能效對標指南

本標準給出了用能單位能效對標類型和方法流程、技術要求及組織管理要求的指南。本標準適用于指導用能單位開展能效對標活動。

GB 50391-2014油田注水工程設計規范

本規范適用于陸上油田和灘海陸采油田注水工程以及氣田采出水回注工程注入部分的新建、擴建和改建工程的設計。

SY/T 0049-2006油田地面工程建設規劃設計規范

本標準規定了油田地面工程建設規劃設計的一般原則和要求。 本標準適用于陸上油田地面工程新建和（或）改擴建工程規劃設計，灘海陸采油田地面工程建設規劃設計可參照執行。

SY/T 0439-2012石油天然氣工程建設基本術語

本標準適用于油田、氣田、輸油管道、輸氣管道、油庫、儲氣庫、液化天然氣等工程設計。

SY/T 5745-2008采油采氣工程詞匯

本標準規定了采油采氣工程常用詞匯。本標準適用于石油天然氣工業采油采氣工程領域，也適用于石油工業其他領域。

SY/T 6081-2012采油工程方案設計編寫規范

本標準規定了編制油田開發采油工程方案設計的原則、依據、內容及技術要求。本標準適用于天然能量及注水開發油田的采油工程方案設計編制。

SY/T 6375-2014油氣田與油氣輸送管道企業能源綜合利用技術導則

本標準規定了油氣田與油氣輸送管道能源綜合利用的一般原則及其主要生產系統能源綜合利用的技術要求。本標準適用于油氣田與油氣輸送管道企業。

SY/T 6420-2016油田地面工程設計節能技術規范

本標準規定了陸上油田新建油氣集輸、注水、注汽、采出水處理和有關公用工程設計節能技術要求，包括降低能源消耗和減少油氣損耗兩個方面。本標準適用于陸上油田地面工程的新建工程。擴建工程、改建工程、灘海陸采油田、海上油田陸岸終端可參照執行。

SY 6500-2010灘（淺）海石油設施檢驗規程

本標準規定了淺（灘）海石油生產設施和移動式平臺上石油專用設備的設計、建造施工、生產作業中發證檢驗程序和檢驗項目的要求。本標準適用于在中華人民共和國淺（灘）海水域內石油設施及設施的作業者、設計單位、施工單位、發證檢驗機構、設備檢驗機構等。

RB/T 122-2017能源管理體系 石油、天然氣開采企業認證要求

本標準規定了對石油、天然氣開采企業(以下簡稱油氣田企業)能源管理體系的認證要求。本標準適用于包括生產井鉆井、油氣生產及生產維修過程的油氣田生產企業的能源管理體系認證。

EN ISO 13628-1-2005石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和建議 ISO 13628-1-2005

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment.This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbons from one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floating or subsea) or onshore, or to inject water/gas through subsea wells.This part of ISO 13628 and its related subsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are not specifically discussed because of their limited use. However, the information presented is applicable to those types of equipment.If requirements as stated inThis part of ISO 13628 are in conflict with, or are inconsistent with, requirements as stated in the relevant complementary parts of ISO 13628, then the specific requirements in the complementary parts take precedence.

DIN EN ISO 13628-1-2010石油和天然氣工業.水下生產系統的設計和操作.第1部分:一般要求和推薦規范(ISO 13628-1-2005 + Amd 1-2010).英文版本EN ISO 13628-1-2005 + A1-2010,只光盤版

This part of ISO 13628 provides general requirements and overall recommendations for development of complete subsea production systems, from the design phase to decommissioning and abandonment. This part of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with more detailed requirements for the subsystems which typically form part of a subsea production system. However, in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) more detailed requirements are included herein, as these subjects are not covered in a subsystem standard.

DIN EN ISO 13628-15-2012石油和天然氣工業.海底生產系統的設計與操作.第15部分:海底結構和歧管(ISO 13628-15-2011).英文版 EN ISO 13628-15-2011

This part of ISO 13628 addresses specific requirements and recommendations for subsea structures and manifolds, within the frameworks set forth by recognized and accepted industry specifications and standards. As such, it does not supersede or eliminate any requirement imposed by any other industry specification. This part of ISO 13628 covers subsea manifolds and templates utilized for pressure control in both subsea production of oil and gas, and subsea injection services.

BS EN ISO 13628-1-2005+A1-2010石油和天然氣工業.水下采油系統的設計和操作.第1部分:一般要求和推薦規范

This part of ISO 13628 provides general requirements and overall recommendations for development ofcomplete subsea production systems, from the design phase to decommissioning and abandonment. Thispart of ISO 13628 is intended as an umbrella document to govern other parts of ISO 13628 dealing with moredetailed requirements for the subsystems which typically form part of a subsea production system. However,in some areas (e.g. system design, structures, manifolds, lifting devices, and colour and marking) moredetailed requirements are included herein, as these subjects are not covered in a subsystem standard.The complete subsea production system comprises several subsystems necessary to produce hydrocarbonsfrom one or more subsea wells and transfer them to a given processing facility located offshore (fixed, floatingor subsea) or onshore, or to inject water/gas through subsea wells. This part of ISO 13628 and its relatedsubsystem standards apply as far as the interface limits described in Clause 4.Specialized equipment, such as split trees and trees and manifolds in atmospheric chambers, are notspecifically discussed because of their limited use. However, the information presented is applicable to thosetypes of equipment.If requirements as stated in this part of ISO 13628 are in conflict with, or are inconsistent with, requirementsas stated in the relevant complementary parts of ISO 13628, then the specific requirements in thecomplementary parts take precedence.