電氣連接器及電纜組件檢測

電氣連接器及電纜組件檢測項目報價？??解決方案？??檢測周期？??樣品要求？

點 擊 解 答??

GB/T 20716.1-2006道路車輛 牽引車和掛車之間的電連接器 第1部分:24V標稱電壓車輛的制動系統和行走系的連接

本部分規定了標稱電壓為24V的牽引車和掛車之間制動系統和行走系的電連接器的尺寸特性、接點分布、試驗和要求。還規定了當連接器斷開時用于接受和儲存插頭的存放插座。

GB/T 20716.2-2006道路車輛牽引車和掛車之間的電連接器 第2部分:12V 標稱電壓車輛的制動系統和行走系的連接

本部分規定了標稱電壓為12V的牽引車和掛車之間制動系統和行走系的電連接器的尺寸特性、接點分布、試驗和要求。還規定了當連接器斷開時用于接受和儲存插頭的存放插座。

GB/T 20717-2006道路車輛 牽引車和掛車之間的電連接器 24V15芯型

本標準規定了15芯電連接器的尺寸、接點分布、試驗及要求，該連接器用于標稱電壓為24V的牽引車及其掛車之間除制動系統和行駛系外的其他設備的電氣連接，還進一步規定了當連接器斷開時用于接收和存儲插頭的存放插座以及7芯和15芯連接器之間的轉換裝置。

GB/T 25088-2010道路車輛 牽引車和掛車之間的電連接器 24V7芯輔助型（24S）

本標準規定了標稱電壓為24V的牽引車和掛車之間7芯24V型電連接器的尺寸、特性要求、接點分布等。24S連接器在準備用于超過7芯要求情況下和GB/T 5053.1的24N連接器一起使用。本標準適用于牽引車和掛車之間7芯24V型電連接器。

HB/Z 401-2013民用飛機綜合模塊化航空電子系統封裝與接口的環境設計指南

本指導性技術文件為民用飛機綜合模塊化航空電子系統封裝與接口的環境適應性設計提供了指南。主要內容包括耐振動和沖擊設計、熱設計、內部安全性/防爆設計、電磁兼容性設計、光纖接口技術和防靜電控制等的通用原則和準則。本指導性技術文件適用民用飛機綜合模塊化航空電子系統封裝與接口(包括光、機、電接口)的環境適應性設計。

SJ 21429-2018軍用電子裝備柔性線纜數字化設計要求

本標準規定了軍用電子裝備柔性線纜數字化設計的一般要求與詳細要求，包括布線數據的使用與管理要求。本標準適用于軍用電子裝備的柔性線纜三維數字化設計與應用。

UL 1740-2007機器人和自動設備

These requirements cover robots and robotic equipment rated 600 V or less and intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70. Since end-use installation of a robot and robotic equipment may vary for each user application, guidelines for end-product installation may be evaluated to the applicable sections of ANSI/RIA R15.06, Standard for Industrial Robots and Robot Systems-Safety Requirements. Portions of the requirements in this Standard have been excerpted from the Robotic Industries Associations (RIA) Standard for Industrial Robots and Robot Systems - Safety Requirements, ANSI/RIA R15.06. These requirements cover robotic equipment and systems intended for indoor and outdoor use in applications such as parts assembly, parts transfer, automated material handling, inspection, loading, diecasting, deburring, welding, paint spraying, clinical/diagnostic systems, pharmaceutical applications, commercial food processing, automated vehicle refueling systems, library book handling/sorting, clean room applications, medical use for surgery, mobile robots, automated guided vehicles, automated storage/retrieval systems, and the like. Unique features or functions associated with the robotic application, not specifically addressed in this Standard, shall also be evaluated to other applicable Standards/requirements. These may include, but are not limited to, Electrical Equipment for Laboratory Use; Part 1: General Requirements, UL 3101-1; Medical and Dental Equipment, UL 544; Power Operated Pumps for Petroleum Product Dispensing Systems, UL 79. In addition to the requirements in this Standard, robots and robotic systems shall also comply with the applicable sections of the Electrical Standard for Industrial Machinery, ANSI/NFPA 79. Robots and robotic systems intended for use in hazardous locations, as defined by the National Electrical Code ANSI/NFPA 70, shall also comply with the requirements in Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, and III, Division 1, Hazardous (Classified) Locations, UL 913. In the following text, a requirement that applies to one type of equipment, such as a controller or teach pendant, will be identified by a specific reference. In the absence of a specific reference or if the term robot or robotic equipment is employed, it is to be understood that the requirement applies to all types of equipment covered by this Standard.

DIN EN 3155-012-2007航空航天系列.用于連接部件的電觸點.第012部分:R級、焊接、D型、凸形、尺寸8、三軸電觸點.產品標準

This standard specifies the required characteristics and tests applicable to size 8, male triaxial electrical contacts 012, type D, solder, class R, used in elements of connection according to EN 3155-002. It shall be used together with EN 3155-001. The associated female contacts are defined in EN 3155-011 and EN 3155-013.

DIN EN 3197-2011航空航天系列.飛行器電子和光學互連系統;德文版本和英文版本EN 3197-2010

The document provides instructions on the methods to be used when installing, repairing or modifying aircraft electrical and optical fibre interconnection systems, subject to the limitations defined in 4 of this document.

DIN EN 4701-001-2015航空航天系列.EN 4531標準觸點用125℃工作溫度下模塊矩形光學連接器.第001部分:技術規范.德文和英文版本EN 4701-001-2014

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for EN 4165 rectangular connectors with removable optical modules using EN 4531-101 contacts.

DIN EN 4830-001-2016航空航天系列.EN 4639-10X接觸用工作溫度為125 ℃的矩形模塊化光連接器.第001部分:技術規格.德文和英文版本EN 4830-001-2015

This European Standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for EN 4165 rectangular connectors with removable optical modules using EN 4639-10X contacts.

DIN EN ISO 13628-6-2008石油和天然氣工業.海底生產系統設計和操作.第6部分:海底生產控制系統(ISO 13628-6:2006)

This standard is applicable to design, fabrication, testing, installation and operation of subsea production control systems in the oil and natural gas exploration. It contains requirements to subsea production control systems.This part of ISO 13628 covers surface control system equipment, subsea-installed control system equipemnt and control fluids. This equipment is utilized for control of subsea production of oil and gas and for subsea water and gas injection services. Where applicable, this part of ISO 13628 can be used for equipment on multiple-well applications.This part of ISO 13628setablishes design standards for systems, subsystems, components and operating fluids in order to provide for the safe and functional control of subsea production equipment.This part of ISO 13628contains various types of information related to subsea production control systems. They are-informative data that provide an overview of the architecture and general functionality of control systems for the purpose of introduction and information ;-basic prescriptive data that shall be adhered to by all types of control system;-selective prescriptive data that are control-system-type sensitive and shall be adhered to only when they are relevant;-optional data or requirements that need be adopted only when considered necessary either by the purchaser or the vendor.In view of the diverse nature of the data provided, control system purchasers and specifiers are advised to select from this part of ISO 13628 only the provisions needed for the application at hand. Failure to adopt a selsctive approach to the provisions contained herein can lead to overspecification and higher purchase costs. Rework and repair of used equipment are beyond the scope of this part of ISO 13628.

BS EN 3372-001-2007航空航天系列.工作溫度在-65℃～175℃或連續工作溫度為200℃、帶卡口連接的、防碰擦、中和高接觸密度、圓形電連接器.技術規范

This standard specifies the general characteristics, the conditions for qualification, acceptance and qualityassurance, as well as the test programs and groups. These bayonet coupling, scoop-proof, medium and highdensity connectors are suitable for operating temperatures ? 65 °C to 175 °C continuous or 200 °C continuousaccording to class and model.

BS EN 60512-25-2-2002電子設備連接器.試驗和測量.試驗25b.衰減(介入損耗).第2節:衰減(介入損耗)

This part of IEC 60512 is applicable to electrical connectors, sockets, cable assemblies orinterconnection systems.This standard describes a frequency and a time domain method to measure attenuation/insertion loss as a function of frequency.

BS EN 60512-25-5-2004電子設備用連接器.試驗和測量.試驗25e.回程損耗

This part of IEC 60512 is applicable to electrical connectors, sockets, cable assemblies or interconnection systems.\nThis part of IEC 60512 describes a frequency and a time domain method to measure return loss as a function of frequency.

BS EN 60512-25-6-2004電子設備用連接器.試驗和測量.試驗25f:眼圖和圖像跳動

This part of IEC 60512 is applicable to electrical connectors, cable assemblies, or interconnection systems within the scope of IEC TC 48.\nThis standard describes methods for measuring an eye pattern response and jitter in the time domain.